SALE 8% OFF
If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
The trianglelab has always been concerned about product quality. We are developing products and working hard to improve the quality. We will not abandon our reputation because of many cheap products on the market. It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others, but please believe in our quality and believe that you will not regret when you receive the goods.
***-***
***-***
***-***
Trianglelab V6 Threaded HeatSink V6 hotend 12V/24V remote Bowen print J-head Hotend and cooling fan bracket for E3D HOTEND for PT100 titan
High quality E3D nozzle*0.4MM(1.75MM for E3D HOTEND) X 1
heat break(1.75MM for E3D HOTEND) X 1
Aluminum V6 Heater Block for V6 hotend(for Sensor Cartridges) X 1
*Compatible pt100 sensor
V6 Threaded Heatsink X 1
Cooling fan(12V or 24V) X 1
Fan bracket X 1
Thermistor Cartrodge X 1
Heater Cartridge(12V or 24V) X 1
* 5 : 100K thermistor – ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan and amp; J-Head) (4.7k pullup)
#define TEMP_SENSOR_0 5
SET: 1.75MM 12V All-metal(0.4mm nozzle) HOTEND
SET: 1.75MM 24V All-metal(0.4mm nozzle) HOTEND
SET: 1.75MM 12V Bore 4.1mm(0.4mm nozzle) HOTEND
SET: 1.75MM 24V Bore 4.1mm(0.4mm nozzle) HOTEND
SET:1.75MM 12V PTFE lining(0.4mm nozzle) HOTEND
SET: 1.75MM 24V PTFE lining(0.4mm nozzle) HOTEND
＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊
