3D Printer Touch Screen FFC FPC Flexible Display Cable 36pin for Lerdge Board

FFC soft cable 0.5 pitch 36pin, the direction is of the same direction
1. P = bit = core = pin (number of copper)
2. Cable length optional. 20cm, 30cm, 50cm, 70cm and 100cm. If you need longer ones, please let us know.
3. Spacing: the distance between the two needle center. If uncertain, measure the bus width (unit: mm)
Spacing algorithm: bus width / (number of pins+ 1)
4. Direction (check the ends of the cable): A with the same direction (metal surface in the same side)

Size :Length :300mm，700mm，1000mm

Test with Lerdge board. Use the board test with the 2 meters cable (without shielding tape), and with the cable winding the stepper motor. The touch screen display operation is normal, no interference phenomenon, the test passed.

Package includes: (Without retail package)
1 x FFC FPC Flexible Display Cable