SALE 35% OFF
Item No.: Missile printing pen
material: plastic
Specifications: National regulations, American regulations, European regulations, British regulations, Australian regulations
Product category: 3D printing pen
Uses: DIY creation, 3D painting, graffiti, puzzle
Length: 17 (cm)
Packaging: English neutral
Model: U.S., European, British, Australian
Brush color: red, black, white, gray
Instructions for use of missile 3d pen:
1. The PLA mode is displayed by default when plugged in. Long press the two buttons at the same time to switch the ABS mode, and the green light flashes after the switch is successful.
2. Click the feed button to start heating, the indicator light is red and steady, and the screen displays 2-3 (the default feeding speed, temperature is 200 degrees) and then heating starts.
3. After the heating is completed, the indicator light is steady green, click ‘▼’ to start feeding and insert consumables.
4. Double-click the ‘▼’ feed button to switch the speed, 2-1 is slow speed, the default temperature is 175 degrees; 2-2 is medium speed, the default temperature is 185 degrees, 2-3 is fast, the default is 200 degrees.
5. Long press the ‘▲’ button to switch to manual discharging, and the indicator light flashes green to switch successfully.
6. Click ‘▲’ for 15 seconds to automatically return the material.
package:
Color box*1+pen*1+adapter*1+USB cable*1 manual*1+base*1+PLA: 3 meters 3 colors trial consumables*1
