Topdon T1200 Car Battery Charger 6V 12V Automatic Lead Acid Lithium Batteries Charger IP65 Car Motorcycle Battery Charger

Description:

TOPDON TORNADO1200 is a smart battery charger for 6V/12V lead-acid and 12V lithium-acid batteries up to 80amp-hours, with twice the charging speed,5 charging steps, 5 charging modes,light weight, portability, ease of use, compact design and other extra ordinary features,provides ahighly safe and reliable solution for charging,repairing,maintaining various batteries.

Specification:

• Input Voltage AC: 100-240V AC, 50-60Hz

• Working Voltage AC: 100-240V AC, 50-60Hz

• Efficiency: 85% Approx.

• Power: 25W Max

• Charging Voltage: Various

• Charging Current: 1.2A(12V);1.2A(6V)

• Low-Voltage Detection: 1V(12V),1V(6V)

• Back Current Drain: and lt; 5mA

• Working Temp.: 14°F to 104°F (-10° to 40°C)

• Storage Temp.: 0° to 130°F (-17°C to 54°C)

• Charger Type: 10 Step, Smart Charger

• Type of Batteries: 6V and amp; 12V

• Battery Chemistries: Wet, Gel, MF, CA, EFB, AGM and amp; LIB

• Battery Capacity: Up to 80Ah (6V and amp;12V);Maintains All Sizes

• Housing Protection: IP65

• Cooling: Natural Convection

• Dimensions:172*71.7*39.6mm(6.77*2.82*1.56 inches)

• Weight:465g(1.03 lb)

PACKAGE LISTS:

1*TOPDON TORNADO1200

1*Cable Clamp

1*AC Cable

1*User Manual

This car battery charger has 5 manually selected charging modes for 6 and 12-volt batteries,to provide the best possible protection and maintenance, no matter the temperature

Using a unique charge algorithm,the TOPDON T1A smarter battery charger goes through revolutionary 5 steps to constantly read and communicate with the battery, charging only to its direct needs,and therefore avoiding any

possibility of incorrect charging.1.Battery Analysis and amp; Diagnosis-Check the battery’s initial condition, including voltage, state-of-charge (SOC), and health, to determine if the battery is stable before charging.

2.Battery Desulphation-Use voltage or high-frequency pulses to break down the sulfates that have built up over time in your aging battery, to extend battery life, and optimize battery performance.

3.Battery Bulk Charge – Begin the Bulk charging process based on the condition of the battery, and return 80% of the battery’s capacity.

4.Absorption Mode – Bring the charge level to 90% by delivering small amounts of current to provide a safe, efficient charge. This limits battery gassing and is essential to prolonging battery life.

5.Battery Float Charge – Maintain the battery fully charged, without boiling out electrolyte or overcharging, to improve the battery life.