SALE 99% OFF
.
21541
The drill bit is needle-shaped and mainly serves to clean the blocked nozzles. The surface of cleaning needle is smooth and without cutting thread ,so it does not scratch the nozzle.Lengthened, apply with new technology, not easy to break, very flexible ,(0.2~0.4mm) bendable.
Tips: Before use this nozzle cleaning needle, first please make sure your nozzle is heated upto the temperature of the printing filament you used.For example, if you are printing ABS , please heat the nozzle to 200-220 celsius degree, PLA is about 180-200 celsius degree.
Type: Nozzle Cleaning Needle
Diameter of Needle: 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1mm ( Please allow 0.05mm error due to manual measurement)
Fit for Nozzle Type: for V6 Nozzle, for MK8 Nozzle, for MK10 Nozzle, for Volcano Nozzle.
Material: 0.2/0.25/0.3/0.35/0.4 mm is stainless steel ,0.5/0.6/0.8/1.0 mm is copper and stainless steel
Color: 0.2/0.25/0.3/0.35/0.4 mm is silver, 0.5/0.6/0.8/1.0 mm is copper+ silver
This list contains 5 pcs Nozzle Cleaning Needles,it is able to choose the single size or the mixed size set.
Set of “Mixed Size 0.2~0.5” contains: each of 0.2 , 0.3 , 0.35 , 0.4 , 0.5mm
Set of “Mixed Size 0.4~1.0” contains: each of 0.4 , 0.5 , 0.6 , 0.8 ,1.0mm
If you need mixed sizes, please make a note when ordering or contact customer service,thank you
5 pcs – Nozzle Cleaning Needles
