433MHz AC 220V Remote Control 10A 2200W 1CH Relay Receiver and Transmitter Switch for Lighting Lamp LED and Door System

Relay Receiver Board Parameter

• Working voltage   :   AC 90V~250V
• Quiescent Current    :   and lt;5MA
• Max current    :  10A
• Max load:    2200W
• RF frequency    :  433MHz
• Pin   :   L \ N  
• Working temperature    :  -30~+80 Celsius
• Receiving Sensitivity    :   and gt;97dbm
• Amount of storage remote controls    :  20  pieces
• Support encoding    :  1527 Leaning code /2262 fixed code
• RF Operating mode    :  ASK superheterodyne wireless reception
• Receiving range    :  Open space is more than 50 meters
• Remote operating mode     :  Momentary Mode / Toggle Mode /  Latched Mode

Working Modes
You can set up in 3 modes: Momentary mode,Toggle mode and Latched mode.
Momentary mode:
Press and hold A button,this  relay will work;Release A  button,this relay will stop.
Toggle mode:
Press A button,the relay will work;press A  button again,this  relay will stop.
Latched mode:
Press A button,the relay will work;press B button again,this  relay will stop,second relay will work.
How to Set up
Momentary mode:
Press learning button once,press A button once,succeed.
Toggle mode:
Press learning button twice,press A button once,succeed.
Latched mode:
Press learning button 3times,press A button once,succeed.
Clean data:
Press learning button 8times,the data will be cleaned.All remotes cannot control this receiver.