SALE 28% OFF
Package includes: 1 piece of glue
The product will be upgraded constantly, the appearance and color may be changed, please don’t mind. And take a consideration before place the order if you have request for color or appearance.
Appearance: transparent semi-fluid
Solid content: 28% -35%,
Hardness after curing: 65-80A
Surface drying time: about 6 minutes
Full curing time: 24-48 hours
Save: Save at 10 degrees to 28 degrees
Special note: Please make a small part of the experiment before use, so that the correct grip method has been used, and heating through an electric hair dryer or hot air gun will accelerate the curing effect.
How to use: How to stick to the touch screen
1. Remove the original high-glue areas on the case first, and wipe off the dirty areas with alcohol or other
2. Slowly apply B7000 liquid glue to the edge of the touch screen or around the frame, just apply one of them.
3. Then put it on again, close it, and gently press it down for about a minute, or you can heat it slightly to accelerate it to solidify. Then just let it sit for a few minutes
4. If it is a display screen, just paint on the middle of the bottom 4 sides of the screen
5. Can it be removed after bonding? ? I ’m telling you, it ’s okay. When removing, use the hot air to slowly blow down the touch screen. If you feel a bit hot, then remove it.
